A light slab with a neutral cast, featuring high-contrast dark markings against a soft, even ground. The veining follows a marble-look pattern with subtle variation in tone and depth.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
Artificial Stone 12 is an engineered stone with a light, neutral base and distinct dark veining. It is used by slab importers, countertop fabricators, and builders for residential and commercial interiors. The slab offers consistent appearance across batches with reliable performance.
Slab importers and countertop fabricators seeking a reliable light neutral slab with strong visual contrast
Sourcing a light slab with consistent veining and neutral tone that performs well in fabrication and installation
Consistent light neutral tone across all slabs
High contrast veining enhances visual depth
Durable surface suitable for frequent use
Compared with natural marble the veining is designed rather than quarried, so the same look can be ordered twice and mitred edges keep the pattern running.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | Artificial Stone 12 |
|---|---|
| Collection | Artificial Marble |
| Material | Engineered stone with marble-look veining |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Polished, honed, and leathered finishes are available. Each offers a different tactile and visual effect.
Yes, standard thicknesses are 2 cm and 3 cm. Custom thicknesses are available upon request.
The production process ensures consistent colour and veining pattern across all batches.
Yes. Email [email protected] with the code Artificial Stone 12, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Artificial Stone 41Artificial Marble
Artificial Stone 40Artificial Marble
Artificial Stone 39Artificial Marble
Artificial Stone 38Artificial Marble
Artificial Stone 37Artificial Marble
Artificial Stone 36Artificial Marble
Artificial Stone 35Artificial Marble
Artificial Stone 34Artificial Marble
Artificial Stone 33Artificial Marble
Artificial Stone 32Artificial MarbleHow the three engineered surfaces differ in body, heat behaviour and where each one belongs in a project.
Thickness decides edge detail, handling weight and support requirements. Both are standard in our production.
The three textures we produce, and what each one does to colour, fingerprints and maintenance.
Tell us the thickness, finish and quantity you need and we will come back with availability.