Faucet
Tapware – ZGC1 – Landon
The Tapware – ZGC1 – Landon sits in our faucet range, built in brass. It is offered in matt black, chrome, gold and gun grey, so it can be matched to the rest of the fittings in the same room. Datasheet description: Landon faucet series.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Features | Landon faucet series |
|---|---|
| Material | Copper handle seat, handle rod Copper main body, base; Low-lead copper valve core seat |
| Finish | Chrome / Matt black / Gun gray / Brushed gold |
| Finish options | Matt Black, Chrome, Gold, Gun Grey |
| Material family | brass |
| Category | Faucet |
Key benefits
Why Specify This Model
- Brass or copper in the wetted body, not plated pot metal alone.
- Available in 4 finishes (matt black, chrome, gold and gun grey), so one specification covers rooms with different finish schedules.
- Made in the same factory as the rest of the Hospitality Bathroom Products range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Buying basin and kitchen taps from different suppliers leaves two versions of the same black.
- Zinc bodies sold as brass fail at the cartridge seat under commercial use.
- Series that stop at basin taps leave the kitchen and shower unmatched.
Who it is for
Specified By
- Hotel and residential developers specifying a whole project
- Kitchen and bathroom distributors
- Fit-out contractors coordinating finishes
Application scenarios
Where It Is Installed
- Hotel guest bathrooms and kitchenettes
- Apartment developments
- Restaurant and bar fit-outs
- Residential renovation projects
Technical features
From the Datasheet
- Landon faucet series
Comparison
How It Compares
- Zinc-only tap bodies
- Zinc bodies sold as brass fail at the cartridge seat under commercial duty cycles. The wetted body here is copper based.
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in matt black, chrome, gold and gun grey.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid abrasive cleaners and solvents, which dull the finish.
- Send the model code Tapware – ZGC1 – Landon over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Faucet
Read next
Guides and Applications
Material Guide
Stainless Steel Zinc Alloy and Brass in Bathroom Hardware
Why the same towel rail costs three different prices, and which material belongs in which part of a bathroom f…
Buying Guide
Choosing a Bathroom Hardware Finish That Will Still Match in Year Five
Chrome, matt black, gun grey, brushed gold and rose gold — how each behaves under cleaning, and why finish nam…
Industry
Hotels and Hospitality
A hotel bathroom is judged in ten seconds and cleaned twice a day. Funmax supplies the whole room — towel warm…
Industry
Residential Developments
On a residential development the bathroom is repeated hundreds of times, so a small inconsistency is multiplie…
FAQ
Tapware – ZGC1 – Landon — Questions
What is the Tapware – ZGC1 – Landon made from?
Brass, as stated on our datasheet for this model.
Which finishes can I order?
This model is listed in matt black, chrome, gold and gun grey. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The faucet range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Tapware – ZGC1 – Landon
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.