Faucet
Tapware – ZGA3
Tapware – ZGA3 is part of the Funmax faucet programme, built in SUS304 stainless steel, brass and zinc alloy. It is offered in matt black and chrome, so it can be matched to the rest of the fittings in the same room. Datasheet description: Kitchen faucet series.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Features | Kitchen faucet series |
|---|---|
| Material | Zinc alloy shell, copper core body, SUS304 bend pipe, zinc alloy handle. |
| Finish | Chrome+Matt black |
| Finish options | Matt Black, Chrome |
| Material family | SUS304 stainless steel, brass, zinc alloy |
| Category | Faucet |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Brass or copper in the wetted body, not plated pot metal alone.
- Zinc alloy over a copper base, which keeps weight in the hand without putting zinc in the water path.
- Available in 2 finishes (matt black and chrome), so one specification covers rooms with different finish schedules.
- Made in the same factory as the rest of the Hospitality Bathroom Products range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Buying basin and kitchen taps from different suppliers leaves two versions of the same black.
- Zinc bodies sold as brass fail at the cartridge seat under commercial use.
- Series that stop at basin taps leave the kitchen and shower unmatched.
Who it is for
Specified By
- Hotel and residential developers specifying a whole project
- Kitchen and bathroom distributors
- Fit-out contractors coordinating finishes
Application scenarios
Where It Is Installed
- Hotel guest bathrooms and kitchenettes
- Apartment developments
- Restaurant and bar fit-outs
- Residential renovation projects
Technical features
From the Datasheet
- Kitchen faucet series
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
- Zinc-only tap bodies
- Zinc bodies sold as brass fail at the cartridge seat under commercial duty cycles. The wetted body here is copper based.
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in matt black and chrome.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Tapware – ZGA3 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Faucet
Read next
Guides and Applications
Material Guide
Stainless Steel Zinc Alloy and Brass in Bathroom Hardware
Why the same towel rail costs three different prices, and which material belongs in which part of a bathroom f…
Buying Guide
Choosing a Bathroom Hardware Finish That Will Still Match in Year Five
Chrome, matt black, gun grey, brushed gold and rose gold — how each behaves under cleaning, and why finish nam…
Industry
Hotels and Hospitality
A hotel bathroom is judged in ten seconds and cleaned twice a day. Funmax supplies the whole room — towel warm…
Industry
Residential Developments
On a residential development the bathroom is repeated hundreds of times, so a small inconsistency is multiplie…
FAQ
Tapware – ZGA3 — Questions
What is the Tapware – ZGA3 made from?
SUS304 stainless steel, brass and zinc alloy, as stated on our datasheet for this model.
Which finishes can I order?
This model is listed in matt black and chrome. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The faucet range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Tapware – ZGA3
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.