100m HDMI Extender Over Dual Coaxial Cables with IR

• Product introduction
• Introduction
• The
• HDMI
• Over Single Coax Extender sends
• HDMI
• signals Over just one
• 75Ohm
• Coaxial cable -- up
• to100m
• away. The
• HDMI
• Over Single Coax Extender supports
• HDMI
• 1.3 and
• HDCP

1.1 with features such as Deep Color and 1080p.By using standard and widely available

• 75Ohm
• RG-6U
• cables, the
• HDMI
• Over Single Coax Extender makes
• HDMI

signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver. The transmitting unit is used to capture the

• HDMI
• input with
• IR

signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted

• HDMI
• signal and reconstructing
• IR

and serial control signals. The Extender offers the most convenient solution for

• HDMI

extension over a single coaxial cable with long distance capability, and is the perfect solution for any application.

• Features
• Flexible extension of high-bandwidth
• HDMI
• 1.3 thanks to the performance and reliability of
• 75Ohm
• RG-6U

Coax cable.

• Audio and video are transmitted digitally over the
• 75Ohm
• RG-6U

Coax cable with zero signal loss.

Single Link Range:

• 1080p

60, 12 bit color depth.

• Compliant with
• HDMI
• 1.3,
• HDCP

1.1 standards.

• Supports digital video formats in Deep Color Mode at up
• to12bits

color.

• Supports
• PCM
• 48KHz

audio.

Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.

Lip-Sync Pass Through.

• Bi-directional
• IR
• system allowing for control of source or display (
• IR
• accessories included)

Specification:

• Frequency Bandwidth
• 225MHz
• link (
• HDMI
• 1.3)
• In/Output Support Resolution
• 480i
• 576i
• 720p@50
• 59.94,60
• 1080i@50/59.94/60
• [email protected]/24/25/29.97/30/50/59.94/60

Input TMDS Signal:

• 3.3 volts

Input DDC Signal:

• 5.0 volts/P-P
• ESD Protection Human body model
• 8kV (air-gap discharge)
• 4kV (contact discharge)
• Coaxial Cable Distance
• Full HD up to 100M (RG-6U cables)
• HD up to 200M (RG-6U cables)
• SD up to 300M (RG-6U cables )
• Dimension (mm)
• 100(D)x105(W)x25(H)
• Weight (g)
• 280

Power Supply:

• (2)
• 5V1A DC

Power consumption:

• 2.3 watts (TX); 2.2 watts (RX)

Operation temperature:

• 32~104 °F

Storage temperature:

• 4 ~140 °F

Relative humidity:

• 20~90 % RH (no condensation)
• Operation Controls and Functions

LINK LED:

This LED will illuminate when the device is connected with HDMI source

HDMI IN:

This slot is to connect with the input source equipment such as DVD or Blue-ray player with

connection cable for input video and audio signal transmission.

IR RX:

Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the

direct line-of-sight of the IR receiver.

• IR
• TX

Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR

blaster in direct line-of-sight of the equipment to be controlled.

EDID:

The EDID switch allows to pre-set an EDID to encourage a “handshake” between the display

and source.

LINK LED:

This LED will illuminate when the device is connected with HDMI source

HDMI IN:

This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.

IR RX:

Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.

IR TX:

Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.

EDID:

The EDID switch allows to pre-set an EDID to encourage a “handshake” between the display and source.

• Position
• EDID Description
• 0 0
• 1080p, 2CH PCM 48KHz
• 0 1
• 1080p, 5.1CH PCM 48KHz
• 1 0
• 1080p, 7.1CH PCM 48KHz
• 1 1
• 1080i, 2CH PCM 48KHz