Insulation Piercing Connector IPC Connector 16-95/16-95 mm2 for ABC Cable

Insulation piercing connector IPC connector 16-95/16-95 mm2 for ABC cable is used for connecting the aluminum and copper main and branch conductors.The IPC connector shall primarily be used as an insulated tap off clamp with main conductor ranging from 16mm2 Copper to 95mm2 Aluminium and branch line ranging between 16 – 95 mm2 copper cross sectional area. The thickness of insulation for both main and branch conductors shall not be greater than 2mm.

Insulation Piercing Connector Specicication

The Structure of Piercing Connector

The piercing connector is mainly composed of reinforced shell, piercing blade, gasket, waterproof silicone grease, high-strength bolts, torque nuts and cable terminal caps. When the cable needs to be branched or connected, insert the cable branch terminal into the waterproof terminal. Cap sleeve, after determining the main line branch position, use a socket wrench to twist the torque nut on the wire clip. During the process, the contact blade will pierce the cable insulation layer and contact the conductor, and the gasket ring presses the cable around the pierced position. Silicon grease overflows, when the torque reaches the set value, the nut torque mechanism falls off, the main line and branch line are connected, and the waterproof performance and electrical effect. reachthe.parameters required by the standard.

Insulation Piercing Connector IPC Connector Uses

Insulation piercing connectors are required for tap-offs of bundled conductors and for connection of service conductors to bundled conductors.These connectors shall be of insulation piercing type both on the main and tap conductors.

Related Product

Insulated Piercing Connector Catalogue Download