Piercing Connector

Insulating Piercing Branch Connectors PCT13C 95/10 (EP)

The insulating piercing branch connectors is suitable for used on low voltage aluminum or copper conductor Aerial Bundle Cable.

  • Insulating Piercing Branch Connectors
  • Cable range: Main: 50-240 mm2,Branch: 50-240 mm2
  • *Copper tinned teeth can be used for copper or aluminum conductor.
  • Aluminum teeth can be used for aluminum conductor.
  • OEM/ODM: Can be customized
Request A Quote Email Us Request A Sample
GroupABC Accessories
CategoryPiercing Connector
StandardsIEC and GB
CustomisationOEM and non standard accepted
Insulating Piercing Branch Connectors PCT13C 95/10 (EP)
OverviewSpecificationsGalleryOrderingFAQRelated

Overview

Insulating Piercing Branch Connectors PCT13C 95/10 (EP) Description

Insulating Piercing Branch Connectors for Overhead Distribution and Services of Rated Voltage 0.6/1kv

The insulating piercing branch connectors is suitable for used on low voltage aluminum conductor Aerial Bundle Cable.It is insulated and suitable for use in liveline work.The IPC is insulation piercing type of main and tee-off conductors.

The body of insulating piercing branch connectors is made of entirely mechanical,weather,UV and age resistant plastic insulation material with no metallic parts outside the body expect for the shearhead or nut of the tightening bolt.

The tap section shall be provided with an end cap filled with oxide inhibiting compound of silicon grease and made from weather UV and age resistant plastic in sulating material.

Service condition: <1kV, 50/60Hz, -10°C to 55°C Standard: IEC 61284, EN 50483, IRAM2435, NFC33 020.

Suitable for Aluminum and copper conductors.

Remarks: ISO mean insulated conductor, BARE mean bare conductor.

Related Product

Material Body:Weather and UV resistant glass fiber reinforced polymer, Thermoplastic polyamide 66 with fiberglass Connecting bridge: Copper tinned, Brass tinned, Al Sealing parts: Flexible PVC End cap: Flexible PVC Grease: Silica gel Bolt: Hot dip galvanized steel, 8.8 grade Washer, Nut: Hot dip galvanized steel Fuse nut: Zinc alloy

Features • Tested for watertightness at a voltage of 6 kV for 30 min in a water bath • Potential free tightening bolts allow safe installations on life lines • Bimetallic, suitable for aluminium and copper conductors • Long neck 13 mm shear head nut ensuring reliable installations • Components not isolated, end cap attached to body • Insulation material made of weather and UV resistant glass fibre reinforced polymer

Insulating Piercing Branch Connectors Catalogue download

Specifications

Codes Ranges and Dimensions

Figures below are reproduced from the CROP catalogue for this item.

ModelsPCT13C 95/10PCT13CB 95/10
Main Line(mm²)6-956-95
Service Line (mm ² )1.5-10(B) 1.5-10
Bolt No.11
Torque (Nm)10NM10NM
RemarksISO to ISOISO to Bare

Ordering and Support

From Enquiry To Delivered Order

1

Send The Requirement

Item code, conductor or cable size and quantity, or a drawing and a photograph for a non standard part.

2

Quotation

Price, packing, carton quantity and lead time are confirmed against the catalogue reference.

3

Sample or Tooling

Samples are sent for approval. Parts that need a new mould go through the in house mould division.

4

Production and Shipment

Production to IEC and GB standards, then packing and shipment on the agreed terms.

Answers

Frequently Asked Questions

How do I choose the right size?
Match your conductor or cable size against the range column in the specification table on this page, then quote the code on that row. If the size falls between two rows, send both figures with your enquiry and the correct item will be confirmed.
Is Insulating Piercing Branch Connectors PCT13C 95/10 (EP) available as a sample before a production order?
Yes. Ask for a sample by WhatsApp on 0086 138 6832 9796 or by email and the item, the packing and the lead time for a full order will be confirmed together.
Which standards do CROP products follow?
All CROP products are made to comply with IEC and GB standards. Where a project calls for a national or utility specification, send the standard reference with your enquiry and the matching item will be quoted.
Can items be produced to our own drawing?
Yes. Non-standard and OEM orders are part of the normal range. Send the drawing, a picture, the weight or the written specification to [email protected] or by WhatsApp and a quotation will be prepared against your requirement. CROP also runs its own mould division for plastic, SMC and stamped parts.
How do I obtain the PDF catalogue?
The catalogue is issued on request. Ask for the section you need by email or WhatsApp on 0086 138 6832 9796 and the PDF will be sent back to you. The catalogue page lists every section that is available.

Next Step

Get A Price For Insulating Piercing Branch Connectors PCT13C 95/10 (EP)

Send the code, the size and the quantity. Drawings for non standard versions are welcome.

Chat on WhatsApp Email Us
Chat on WhatsApp