Anchor Clamps for ADSS

Dead End Clamp for ADSS conductor

The Dead End Clamp for ADSS conductor is designed to anchor insulated ADSS conductors to the pole or wall.The ADSS tension clamp is composed of a body, wedges and removable and adjustable bail.

  • Standard: NFC 33-042. DEAD END CLAMP (DEC) assembly is designed for supporting Insulated Aerial Bundle Cable (ABC) of the LV distribution system at terminal section and at acute angle poles. The whole assembly has no loose parts and it does not require special tool to install it. DEC is a conical wedge clamp comprising of
  • An open body
  • An inner sheath consisting of two insulating plastics (inserts) ensuring the clamping of the messenger cable without damaging cable insulation.
  • An unloosable stainless steel flexible wire rope equipped with a movable thimble and two sleeves compressed at the end of the wire rope to be locked at the clamp body.
  • The body, inserts and thimble of the Dead End Clamps are made of high strength reinforced thermoplastic, U-V radiant material which was very high mechanical and climatic properties
Request A Quote Email Us Request A Sample
GroupTelecom Cable Accessories
CategoryAnchor Clamps for ADSS
StandardsIEC and GB
CustomisationOEM and non standard accepted
Dead End Clamp for ADSS conductor
OverviewSpecificationsOrderingFAQRelated

Overview

Dead End Clamp for ADSS Conductor Description

Description of Dead End Clamp for ADSS Conductor

The Dead End Clamp for ADSS conductor is designed to anchor insulated service lines with 2 or 4 conductors to the pole or wall. The ADSS tension clamp is composed of a body, wedges and removable and adjustable bail or pad.The PA series Anchor clamps are design to supporting the neutral messenger,the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Standard: NFC 33-042.

Material of ADSS Tension Clamp

The ADSS tension clamp body, the main mechanical component is manufactured in heavy duty weatherproof synthetic material. The wedge, made from synthetic material exerts necessary mechanical pressure in retaining the cable in the body of the clamp. The pull hook is made from anti corrosion rod. For anchoring isolated coaxial and unipolar cables.

Feature of PA Series Anchor Clamps

1.Simple and fast installation requiring no tools. 2.Suits to all field configurations. 3.Possible to mount on pole line hardware with open or closed eye. 4.Mechanical traction resistant. 5.Supports industrial duty tension. 6.Corrosion resistant. 7.Weatherproof.

For the Correct Installing PA1500 Dead End Clamp, the Following Steps Are Recommended

  • Loosen the mooring hook from the anchor clamp.
  • Place the hook en the place to be mooring point or support, fixing it inside the body of the clamp
  • Remove the wedge from its base and then place the cable within the clamp.
  • Replace the wedge to its corresponding position and proceed to tense the cable taut.

(*)Add “FA” mean steel rope, add “SS” mean stainless steel rope

Specifications

Codes Ranges and Dimensions

Figures below are reproduced from the CROP catalogue for this item.

ModelsAC-PA69-ADSSAC-PA1500-ADSSAC-PA2000-ADSS
Cable diameter(mm)5~ 98 ~ 1212-15
Core No.111
MBL(daN)600 (800)1000(1500)1500(2000)

Ordering and Support

From Enquiry To Delivered Order

1

Send The Requirement

Item code, conductor or cable size and quantity, or a drawing and a photograph for a non standard part.

2

Quotation

Price, packing, carton quantity and lead time are confirmed against the catalogue reference.

3

Sample or Tooling

Samples are sent for approval. Parts that need a new mould go through the in house mould division.

4

Production and Shipment

Production to IEC and GB standards, then packing and shipment on the agreed terms.

Answers

Frequently Asked Questions

How do I choose the right size?
Match your conductor or cable size against the range column in the specification table on this page, then quote the code on that row. If the size falls between two rows, send both figures with your enquiry and the correct item will be confirmed.
Is Dead End Clamp for ADSS conductor available as a sample before a production order?
Yes. Ask for a sample by WhatsApp on 0086 138 6832 9796 or by email and the item, the packing and the lead time for a full order will be confirmed together.
Which standards do CROP products follow?
All CROP products are made to comply with IEC and GB standards. Where a project calls for a national or utility specification, send the standard reference with your enquiry and the matching item will be quoted.
Can items be produced to our own drawing?
Yes. Non-standard and OEM orders are part of the normal range. Send the drawing, a picture, the weight or the written specification to [email protected] or by WhatsApp and a quotation will be prepared against your requirement. CROP also runs its own mould division for plastic, SMC and stamped parts.
How do I obtain the PDF catalogue?
The catalogue is issued on request. Ask for the section you need by email or WhatsApp on 0086 138 6832 9796 and the PDF will be sent back to you. The catalogue page lists every section that is available.

Next Step

Get A Price For Dead End Clamp for ADSS conductor

Send the code, the size and the quantity. Drawings for non standard versions are welcome.

Chat on WhatsApp Email Us
Chat on WhatsApp