Gas Pump
YL02L 35W Biogas / Natural Gas Pump (AC)
Raise biogas or natural-gas outlet pressure when the line cannot keep the boiler or stove flame stable.
- 35W AC pump, 220V/50Hz
- Max flow 35L/min ±10%
- Max pressure 35kPa ±10%
- Circuit separated from the gas duct
- Same platform as the 20–100W YL / DCY line; larger power can be customized
Audience: Biogas-project buyers, household natural-gas users with peak-period short supply, and restaurants that need a larger gas flow.
Specifications
| Model | YL02L |
|---|---|
| Power | 35W |
| Max flow | 35L/min ±10% |
| Max pressure | 35kPa ±10% |
| Voltage / frequency | 220V/50Hz |
| Drive | AC only |
The job this machine does
Household boilers heat slowly when inlet pressure drops. Restaurant burners wait on a weak flame during peak gas hours. Biogas digesters often leave the stove with too little outlet pressure to burn cleanly.
YL02L is a 35W AC booster that sits on the gas line and raises outlet pressure. The electric circuit is built apart from the gas duct so moisture and corrosive components in biogas do not sit on the electronics.
- Biogas projects that need higher outlet pressure
- Household natural gas during peak supply periods
- Restaurants that want larger gas flow and a stronger flame
- Gas-fired hot water boilers that rise in temperature too slowly
Buying notes
- Lead time is normally 30 days after advanced payment.
- Payment terms on the FAQ page are T/T and L/C.
- Warranty is one year for most of the products.
Questions
What does YL02L actually change on the line?
It increases outlet pressure on biogas or natural-gas pipe so a boiler or stove sees more flow. The source page describes it as a machine that increases pressure on natural gas.
How is this different from an aquarium air pump?
The electric circuit is separated from the gas duct so moisture and caustic chemicals in the gas are less likely to damage the electronics.
Can you supply other wattages?
The published line is 20–100W (DCY-06L, YL-01L, YL02L, YL03L, YL04L, YL05L). The source pages state larger power can be customized.
What is the lead time and warranty?
Lead time is normally 30 days after advance payment. Warranty is one year for most products. Payment terms on the FAQ page are T/T and L/C.
