Garden watering manufacturer in Yuyao Zhejiang since 2005
Garden lawn being watered under low afternoon sun

Plastic Impulse Sprinkler YM8103

YM8103 is an impulse sprinkler with a plastic build.

Plastic Impulse Sprinkler YM8103 garden watering product from YIMAY
Product Overview

What YM8103 Is

YM8103 is an impulse sprinkler with a plastic build. It ships on tie on card, 48 pieces per carton at 0.032 CBM. It is designed to run from a standard garden hose and pairs with the two hour mechanical timers in this catalogue for unattended watering.

Key Benefits

  • Plastic build holds the entry price point without changing how it connects to the rest of the range
  • Published carton data, 48 pieces at 0.032 CBM, so landed cost can be calculated before you order
  • Impulse heads offered in plastic and metal on four different bases
  • Wing spike models can be stepped into the ground by foot
Plastic Impulse Sprinkler YM8103 garden watering product from YIMAY
Plastic Impulse Sprinkler YM8103. Tie on card retail packing.
Problems It Solves

What Goes Wrong Without It

  • Spike sprinklers that will not push into dry or stony ground
  • Plastic impulse heads that will not stay aimed once the pressure rises
  • Lawns that are rectangular but only get round coverage
  • Novelty base designs that look good on shelf but tip over on grass
Technical Features

What Is Actually In the Box

  • Construction plastic
  • Retail pack tie on card
  • Single jet impulse mechanism stepped around a circle or an arc
  • Throw and arc set at the head
Specification

YM8103 Technical and Carton Data

Every figure below comes from our production and packing record. Where a value is not confirmed it is left out rather than estimated.

Specification for Plastic Impulse Sprinkler YM8103
ModelYM8103
Product TypeImpulse Sprinkler
ConstructionPlastic
Retail PackingTie on card
Pieces per Carton48
Carton Size43 x 34 x 22 cm
CBM per Carton0.032
Net Weight per Carton3.1 kg
Gross Weight per Carton3.4 kg

Materials

  • Moulded plastic body
  • Rubber sealing washer at the coupling

Manufacturing Process

  • Injection moulding
  • Over moulding of the soft coated grip
  • Assembly and seal fitting
  • Water test
  • Blister or box packing
Quality Control

What We Check Before It Ships

  • Dimensional check against the production specification on every run
  • Water test on assembled couplings and valve bodies
  • Visual inspection of the moulding and of any plated or coated surface
  • Carton weight and count verification against the published packing data
Customisation

What Can Be Changed for Your Brand

  • Colour change to your Pantone references subject to confirmation on this body
  • Private label blister card or colour box printed to your artwork
  • Barcode and country of origin marking to your market requirement
  • Carton marking and export documentation set agreed at order stage
Who It Is For

Buyers This Model Suits

  • Garden centres and DIY chains covering lawn care
  • Importers who need metal and plastic versions of the same mechanism
  • Seasonal supermarket programmes needing a low entry price point
  • Distributors serving allotment and smallholding customers
Application Scenarios

Where It Gets Used

  • Long throw watering of an open lawn paddock or allotment strip
  • Covering an irregular area that an oscillating bar would waste water on
  • Unattended watering on a two hour mechanical timer line
  • Seasonal garden promotion needing a recognisable sprinkler shape
Use Guide

How to Get the Best Out of YM8103

The four points end customers most often get wrong. Worth putting on the pack or in the listing copy.

  1. Step 1

    Set the sprinkler before turning the water on, not after

  2. Step 2

    Wet the ground lightly before pushing a spike base into dry soil

  3. Step 3

    Start at low pressure and open the tap gradually to set the throw

  4. Step 4

    Rinse the head at the end of the season to clear grit from the jets

Comparison

How YM8103 Differs From Its Siblings

These models share a body family. The difference is finish, size or feature, not fit, which is what lets them sit on the same wall at different price points.

Compare

Metal Impulse Sprinkler YM8104

YM8104 is the metal build. YM8103 is the plastic version and holds the entry price on the same connection.

Compare

Three Arm Sprinkler with Plastic Spike YM8105

YM8105 is a rotating arm sprinkler. YM8103 is a impulse sprinkler, and the two are usually sold alongside each other rather than instead of each other.

Questions Buyers Ask

YM8103 Questions Buyers Ask

How is YM8103 packed for shipping?

Tie on card packing, 48 pieces per carton, in a 43 x 34 x 22 cm carton at 0.032 CBM, 3.1 kg net and 3.4 kg gross.

How far does this sprinkler throw?

Throw depends on your local mains pressure, so we do not publish a radius we have not measured under your conditions. Ask for a sample and test it on your own supply before you commit a programme.

Can the arc be adjusted?

Impulse heads are set at the head to run a full circle or a part arc. Confirm the exact adjustment range for this model with us before you write listing copy around it.

Can YM8103 be supplied under our own brand?

Yes. Private label and customisation are standard here. Send your artwork, colour references and target volume and we will quote it. Sample delivery is 30 days.

What is the minimum order for this model?

It depends on the pack format and whether the run is private label. Tell us the quantity you have in mind and we will tell you plainly whether it is workable rather than quoting a number that only suits us.

Request Pricing on YM8103

Send your annual volume, your destination market and whether you need private label artwork. Sample delivery is 30 days.