Hybrid Solar Inverter

10KW Deye Solar Hybrid Inverter with 40V-60V Battery Voltage

Name: 10KW Deye Solar Hybrid Inverter with 40V-60V Battery Voltage
Brand: WeBright Solar

Front view of a grey wall-mounted industrial electronic device with a digital display screen and warning label.

Product Overview

What This Product Is

A single-phase hybrid inverter rated at 10KW with a battery voltage range of 40V to 60V, designed for use in grid-tie and off-grid systems. It supports two MPPT trackers, up to 16 units in parallel, and can integrate with lead-acid or lithium-ion batteries. The inverter features a colorful touch LCD, IP65 protection, and AC coupling capability for retrofitting existing solar systems. It is suitable for residential and small commercial applications where grid backup and battery storage are required.

Key Benefits

What You Get

Supports AC coupling to retrofit existing solar systems without replacing the original inverter
Two MPPT trackers allow independent tracking for two PV strings with different orientations
Battery voltage range of 40V to 60V compatible with both lead-acid and lithium-ion batteries

Max charging and discharging current of 190A, suitable for large battery banks
IP65 protection degree for outdoor installation in harsh environments
Colorful touch LCD for easy monitoring and configuration of system parameters

Who It Is For

Buyers and Sites

Solar installers integrating battery storage into existing solar systems
EPC contractors building hybrid systems for residential and small commercial projects
Electrical wholesalers supplying hybrid inverters for off-grid and unstable-grid markets
Homeowners who want to add battery backup to their current solar setup

Application Scenarios

Where It Is Installed

Retrofitting an existing grid-tie solar system with battery storage in a residential home
Installing a hybrid system in a small business with unreliable grid supply
Adding battery backup to a solar system in a remote area where grid access is intermittent
Supporting a home with high daytime solar generation and evening load demand

Problems It Solves

What This Removes From the Job

Existing solar systems without battery storage cannot provide backup during grid outages
Mismatched battery voltage and inverter compatibility in systems built from separate components
Lack of AC coupling capability in older inverters that prevents retrofitting
No built-in MPPT tracking for multiple PV strings with different shading or orientation

Technical Features

How It Is Built

Single-phase hybrid inverter with 10KW rated output and 2 times peak power for 10 seconds
Two MPPT trackers with 18A+18A max input current per tracker and 27A+27A short-circuit current
Battery input voltage range of 40V to 60V, supporting lead-acid and lithium-ion batteries
Max charging and discharging current of 190A, with self-adaptive charging for lithium-ion batteries

IP65 protection degree for outdoor use in dusty or wet conditions
Colorful touch LCD for real-time monitoring and system configuration

Specifications

Technical Data

Values below are taken from the product documentation. Anything not listed is confirmed against your order.

Inverter Model	SUN-10K-SG05LP1-EU-AM2-P
Rated Output Power	10KW
Battery Voltage Range	40V-60V
Max Charging Current	190A
Max Discharging Current	190A
Number of MPPT Trackers	2
Max PV Input Power	16000W
Max PV Input Voltage	500V
MPPT Voltage Range	150-425V
Rated AC Output Voltage	220V/230V
Grid Frequency Range	50Hz/45Hz-55Hz or 60Hz/55Hz-65Hz
Efficiency	Max 97.60%, Euro 96.50%
Protection	IP65, DC reverse polarity, AC overcurrent, thermal, overvoltage, short circuit, DC component monitoring, arc fault

Configuration

What Is in the Shipment

The packing list follows this table item by item.

Model	SUN-3.6K-SG05LP1-EU-AM2-P	SUN-5K-SG05LP1-EU-AM2-P	SUN-6K-SG05LP1-EU-AM2-P	SUN-7K-SG05LP1-EU-AM2-P	SUN-7.6K-SG05LP1-EU-AM2-P	SUN-8K-SG05LP1-EU-AM2-P	SUN-10K-SG05LP1-EU-AM2-P
Battery Type	Lead-acid or Lithium-ion
Battery Voltage Range(V)	40-60
Max.Charging Current(A)	90	120	135	175	190	190	210
Max.Discharging Current(A)	90	120	135	175	190	190	210
Charging Strategy for Li-ion Battery	Self-adaption to BMS
Number of battery input	1
Max. PV Access Power (W)	7200	10000	12000	14000	15200	16000	20000
Max PV Input Power（W）	5760	8000	9600	11200	12160	12800	16000
Max PV Input Voltage（V）	500
Start-up Voltage（V）	125
MPPT Voltage Range（V）	150-425
Rated PV Input Voltage(V)	370
Max Operating PV Input Current（A）	18+18	32+32
Max Input Short-Circuit Current（A）	27+27	48+48
No.of MPP Trackers/No.of String Per MPP Tracker	2/1+1	2/2+2
Rated AC Input/Output Active Power（W）	3600	5000	6000	7000	7600	8000	10000
Max AC Input/Output Apparent Power （VA）	3960	5500	6600	7700	8360	8800	11000
Rated AC Input/Output Current（A）	16.4/15.7	22.7/21.7	27.3/26.1	31.9/30.5	34.5/33	36.4/34.8	45.5/43.5
Max AC Input/Output Current（A）	18/17.2	25/23.9	30/28.7	35.0/33.5	38/36.3	40/38.3	50/47.9
Max Continuous AC Passthrough (grid to load)（A）	35	40	50
Peak Power (off-grid)（W）	2 times of rated power,10s
Rated Input/Output Voltage/Range(V)	220V/230 0.85Un-1.1Un
Grid Connection Form	L+N+PE
Rated Input/Output Grid Frequency/Range	50Hz/45Hz-55Hz 60Hz/55Hz-65Hz
Power Factor Adjustment Range	0.8 leading-0.8lagging
Total Current Harmonic Distortion THDi	<3% (of nominal power)
DC Injection Current	<0.5%ln
Max Efficiency	97.60%
Euro Efficiency	96.50%
MPPT Efficiency	＞99%
Integrated	DC Reverse Polarity Protection, AC Output Overcurrent Protection, Thermal Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring, Arc Fault Circuit Interrupter (optional), Anti-islanding Protection, DC Switch, Insulation Impedance Detection, Residual Current Detection
Surge Protection Level	TYPE II(DC),TYPE II(AC)
Communication Interface	RS485/RS232/CAN
Monitor Mode	GPRS/WIFI/Bluetooth/4G/LAN(optional)
Operating Temperature Range	-40 to +60℃, >45℃ Derating
Permissible Ambient Humidity	0~100%
Permissible Altitude	2500m
Noise	＜30 dB(A)
Ingress Protection(IP) Rating	IP 65
Inverter Topology	Non-Isolated
Over Voltage Category	OVC II(DC),OVC III(AC)
Cabinet size（WHD）[mm]	330×580×232 (Excluding Connectors and Brackets)
Weight[kg]	24.9
Warranty	5 Years/10 Years the Warranty Period Depends the Final Installation Site of Inverter, More Info Please Refer to Warranty Policy
Type Of Cooling	Intelligent air cooling
Grid Regulation	IEC 61727,IEC 62116,CEI 0-21,EN 50549，NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G98,G99,VDE-AR-N 4105
Safety EMC/Standard	IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

Materials

What It Is Made Of

High-temperature resistant PCB and heat sink for stable operation
IP65-rated enclosure with sealed connectors and ventilation for outdoor use
High-efficiency MOSFETs and IGBTs for DC-AC conversion
Colorful touch LCD with capacitive touchscreen interface
Internal relays and contactors for AC coupling and grid switching

Manufacturing and Preparation

Before It Ships

Review the load profile and confirm the 10KW inverter matches the total AC demand
Verify the PV array size and string configuration against the 16000W max input power
Select battery type (lead-acid or lithium-ion) and confirm voltage within 40V-60V range
Configure MPPT settings for two PV strings with different orientations or shading
Test inverter function with battery and PV input before final installation

Quality Control

Checked Before Packing

Inverter powered up and tested for output stability and LCD functionality
MPPT tracking verified under simulated sunlight conditions
Battery charging and discharging currents checked against the 190A limit
IP65 enclosure tested for dust and water resistance
DC and AC protection circuits validated during functional test

Customisation

What Can Be Changed at Order Stage

Battery type selected at order stage: lead-acid or lithium-ion
MPPT configuration adjusted for two strings with different voltage or shading
Grid standard set for 50Hz or 60Hz, single-phase EU or US voltage

AC coupling mode enabled for retrofitting existing solar systems
Firmware updated to support latest BMS communication protocols for lithium batteries

Comparison

How It Compares With the Alternatives

Grid-tie inverter	Supports battery storage and off-grid operation, but requires a battery bank that a grid-tie inverter does not
Off-grid inverter	Can operate on grid and charge from it, but needs a battery bank and is more complex than a pure off-grid unit
Hybrid inverter with higher voltage battery	Uses lower battery voltage (40V-60V) for easier battery integration, but may require more parallel batteries for high capacity
Buying inverter and battery separately	Fixed configuration with matched battery voltage and MPPT, but less flexibility in component choice

Use Guide

Getting It Working on Site

1

Confirm the total load does not exceed the 10KW rated output and 11000VA apparent power

2

Connect the two PV strings to the two MPPT inputs with matching orientation and shading

3

Set the battery voltage to 40V-60V range and select the correct battery type in the inverter menu

4

Enable AC coupling mode if retrofitting an existing solar system

5

Monitor the inverter LCD for battery state of charge, grid status, and fault codes

Go Deeper

Related Pages

Questions About the 10KW Deye Solar Hybrid Inverter with 40V-60V Battery Voltage

Can this inverter be used to retrofit an existing solar system?

Yes. It supports AC coupling, allowing integration with an existing grid-tie solar system without replacing the original inverter.

What battery types are supported?

The inverter supports both lead-acid and lithium-ion batteries, with self-adaptive charging for lithium-ion batteries.

What is the battery voltage range?

The battery input voltage range is 40V to 60V, suitable for 48V nominal systems.

How many PV strings can it handle?

It has two MPPT trackers, supporting up to two PV strings with independent tracking.

Is the inverter suitable for outdoor installation?

Yes. It has an IP65 protection degree, making it suitable for outdoor use in dusty or wet environments.

Can multiple inverters be connected in parallel?

Yes. Up to 16 units can be connected in parallel for larger systems.

What is the maximum PV input power?

The maximum PV input power is 16000W, with a max input voltage of 500V and MPPT range of 150-425V.

Request a Quote for the 10KW Deye Solar Hybrid Inverter with 40V-60V Battery Voltage

Send your load list or drawing on WhatsApp or by email and an engineer will reply with pricing, the configuration and the packing details.

Chat on WhatsApp Email Us Back to Hybrid Solar Inverter