Massive 716Wh capacity and 800W rated wattage The ultra-stable LiFePO4 battery chemistry,2500+ life cycles 4*110V AC outlets, 2*100W PD ports, 2*5V/3A USB-A ports, 2*regulated 12V/10A DC outputs, 1*12V/10A car port,1*15W wireless charging pad. With max input of 200W, this power station can be fully recharged in 3-4 hrs with solar panels It can also get fully recharged from an AC wall outlet in 3-4 hrs or a 12V car port in 7-8 hrs.


A 1000W portable power station with a 716Wh LiFePO4 battery pack designed for off-grid use during camping, travel, or power outages. It features four 110V AC outlets, two 100W USB-C PD ports, two 5V/3A USB-A ports, two 12V/10A DC outputs, one 12V/10A car port, a 15W wireless charging pad, and an LED lantern. The unit supports four recharge methods: wall outlet, solar panel, car port, and generator. It includes built-in MPPT for solar input and can be fully recharged in 3-4 hours using a 200W solar panel.
Values below are taken from the product documentation. Anything not listed is confirmed against your order.
| Power Output | 800W/1000W pure sine wave inverter |
|---|---|
| Battery Capacity | 716Wh LiFePO4 |
| Battery Life | 2500+ charge cycles |
| Solar Input | 200W max, 12-28V OCV, 8A |
| AC Outlets | 4 x 110V, 2 x 220V-240V |
| USB-C Ports | 2 x 100W PD |
| USB-A Ports | 2 x 5V/3A |
| DC Outputs | 2 x 12V/10A, 1 x 12V/10A car port |
| Wireless Charging | 1 x 15W pad |
| LED Lantern | Built-in |
| Recharge Time | 3-4 hours with 200W solar or AC outlet |
| Car Port Recharge | 7-8 hours |
| Dimensions | 12.6 x 8.5 x 8.7 inches |
| Weight | 21.4lbs |
| Display | LCD with battery level and system status |
| Traditional gas generator | No fuel, no noise, no emissions, but limited to 1000W output |
|---|---|
| Standard power bank | Higher capacity and multiple AC outlets, but heavier and larger |
| Fixed solar system | Portable and mobile, but less energy storage than a permanent setup |
| Lead-acid portable unit | LiFePO4 battery lasts longer and charges faster, but higher initial cost |
Charge the unit fully before first use to ensure battery calibration
Connect solar panel to the solar input port using the included cable
Use the LCD display to monitor charging status and battery level
Plug devices into AC, USB, or DC ports based on their power requirements
Avoid overloading the 1000W inverter by checking total device wattage
Store in a dry, cool place when not in use to extend battery life

2000W AC Pure Sine Wave Inverter (4,800W Surge) 2,000Wh Capacity LiFePO4 Battery with 3,500+ Life Cycles to 80
View product →
Pure Sine Wave Output Lithium Battery 500Wh Built-in Output: 220V/110V Type-C, DC 12V, USB Charged by Solar Pa
View product →
Pure Sine Wave Output Lithium Battery 550Wh Built-in Output: 220V/110V Type-C, DC 12V, USB Charged by Solar Pa
View product →It can run devices up to 1000W, including LED lights, fans, projectors, laptops, small refrigerators, and electric cookers.
It takes 3-4 hours to fully recharge using a 200W solar panel.
Yes, as long as the panel has a 12-28V OCV output and 200W max input, and uses MC4 connectors.
The battery is integrated into the unit and not user-replaceable. Replacement requires factory service.
Yes, two of the AC outlets are rated for 220V-240V output.
Yes, the unit can be charged while powering devices, but charging speed may slow down under load.
The package includes the power station, AC adapter, car charging cable, solar charging cable, USB-C cable, and user manual.
Send your load list or drawing on WhatsApp or by email and an engineer will reply with pricing, the configuration and the packing details.