12V And 24V Lithium Batteries
Drop-in LiFePO4 replacements for lead-acid, from an 8Ah UPS block to a 400Ah house bank, with IP65 cases and Bluetooth monitoring.
Sike Power builds LiFePO4 packs for residential storage, telecom backup, golf carts, RVs and commercial ESS - 32 of them, each with its published capacity, case dimensions, BMS rating, IP rating and cycle life on the page. Only brand-new grade A cells and top-brand smart BMS go into them, and the after-sales complaint rate has stayed below 0.05% for five years.
12V and 24V lead-acid replacements, wall-mounted and stackable home storage, 19-inch rack modules, 48V telecom backup, golf cart and automotive-case packs, and liquid-cooled commercial ESS cabinets. Each group is organised around the decision a buyer actually has to make: the tray it fits, the bus voltage, the hold-up time or the expansion path.
Drop-in LiFePO4 replacements for lead-acid, from an 8Ah UPS block to a 400Ah house bank, with IP65 cases and Bluetooth monitoring.
Wall-mounted 51.2V home storage from 5 kWh to 30 kWh, 6000+ cycles, five-year warranty, IP54 on the wall-hung models.
51.2V modules that stack from 5 kWh to 30 kWh, 6000+ cycles, RS232, RS485 and CAN communication.
19-inch 51.2V modules at 5 kWh and 10 kWh, 6000+ cycles, IP54, for racks that have to stay serviceable.
48V server rack packs at 50Ah, 100Ah and 200Ah for base stations, exchanges and data centres, 6000+ cycles, 19-inch format.
48V and 72V packs at 100Ah, IP67, 3500+ cycles, 65-85 km on a full charge, drop-in for lead-acid and AGM.
H7, H8 and group 24 cases with automotive terminals for low-speed vehicles, light EV and solar - energy storage, not cranking.
Liquid-cooled all-in-one 215 kWh and 232 kWh cabinets integrating LFP battery, BMS, PCS, EMS, thermal control and fire protection.
Two from each group, to show how the specifications are written. The full list of 32 is on the products page, with no pagination and nothing held back.
Six sectors, each with its own failure mode and its own reason for choosing one pack over another.
Powerwall, stackable and rack mount 51.2V storage for homes running solar self-consumption, tariff shifting or full off-grid.
12V and 24V LiFePO4 house banks from 100Ah to 400Ah, IP65, Bluetooth monitored, at about a third of the weight of lead-acid.
12V and 24V deep cycle packs for trolling motors, electronics and house loads, IP65, 3000+ cycles.
48V rack packs at 50Ah, 100Ah and 200Ah for base stations, exchanges and DC plant, 6000+ cycles, parallel to fifteen units.
48V and 72V 100Ah packs plus automotive-case 12V batteries for carts, LSVs and light EVs, IP67, 3500+ cycles.
Liquid-cooled 215 kWh and 232 kWh all-in-one cabinets, plus 51.2V modular banks for smaller commercial sites.
None of them is solved by a lower price, and all four are answered on the product pages rather than in a conversation.
Capacity is the easy number. The BMS current rating, the IP rating, the case dimensions and the depth of discharge are what decide whether a pack fits and survives. Every product page here publishes them.
Grade B cells are cells that failed a consistency test. A pack built from them looks identical on day one and drifts apart over its first hundred cycles. We use brand-new grade A cells and a top-brand BMS, and we will say so in writing.
Group 24 at 260x170x210 mm, group 31 at 330x172x240 mm, H7 at 315x175x190 mm, H8 at 359x177x188 mm. The mechanical fit is published because it is the part that stops an upgrade dead.
Every 51.2V product parallels: stackable modules to 30 kWh, powerwall packs to 120 kWh, telecom modules up to fifteen units. The second phase is a module, not a new system.
Production and offices sit together at the BAK Industrial Park in Da Peng New District, Shenzhen, which is why a process question gets answered the same day instead of being relayed to a subcontractor.



Your brand on the case, your protocol list, your packaging - with a sample approved before the bulk order runs.
Grade A cells and a top-brand smart BMS, chosen for the duty cycle rather than the price sheet.
Size the bank from the load, then build it so the second phase is a module instead of a replacement.
CE, UN38.3, MSDS, IEC, UL and ROHS documents, and packing that satisfies lithium transport rules by sea or air.
A five-year warranty on the energy storage range, a complaint rate below 0.05%, and engineers who answer the same day.
How to size a home battery, how to calculate telecom hold-up time, what a smart BMS actually does, and which datasheet figures are worth comparing.
Why a 100Ah lithium pack replaces a 200Ah lead-acid bank, what changes about charging, and where lead-acid still makes sense.
Working from evening load rather than array size, choosing between 5, 10, 15 and 30 kWh, and leaving an expansion path.
Turning site load in kW into a module count, and the four things that make the real hold-up shorter than the arithmetic.
A manufacturer. Shenzhen Sike Power Technology Co., Ltd. runs its own production plant and offices in Da Peng New District, Shenzhen, with assembly, cell grading, aging tests and final inspection in house.
32 LiFePO4 battery packs in eight groups: 12V and 24V deep cycle, powerwall, stackable, rack mount, 48V telecom, golf cart, automotive-case and liquid-cooled commercial ESS cabinets.
Brand-new grade A LiFePO4 cells from top-brand cell makers, with a top-brand smart BMS. That is the whole quality argument, and it is the first thing to ask any battery supplier.
The factory is stated as ISO9001, ISO14001 and ISO45001 certified. Product certificates listed across the range are CE, UN38.3, MSDS, UL, IEC and ROHS. Ask us for the certificate covering your exact model and market.
Yes, and most of what we build carries a customer's brand. Case, BMS behaviour, protocol list, label and packaging follow your specification, with a sample approved before bulk production.
Fast reaction is the standard the company sets for itself: WhatsApp is usually answered the same working day, email within 24 hours.
You will get a pack, a capacity and an expansion path rather than a price on its own.