GFRP Rebar Pultrusion Line Rubber Haul off Machine
The GFRP Rebar Pultrusion Line Rubber Haul off Machine developed by Prowell Technology can cooperate with the FRP Rebar production line to produce high-quality FRP Rebar.
Unstable haul-off speed or a rough cut ruins thread profile and tensile consistency on FRP rock bolts.
How this machine is used
The GFRP Rebar Pultrusion Line Rubber Haul off Machine developed by Prowell Technology can cooperate with the FRP Rebar production line to produce high-quality FRP Rebar.
The rubber block tractor we provide can be configured with frequency conversion speed regulation, pneumatic compression, high heat-resistant rubber block, dual power traction, and an effective traction length of 2.8 meters, which greatly improves the density and strength of the product.
At the same time, the FRP Rebar tractor can also be used in conjunction with the automatic cutting machine and the turning frame, which can complete high-precision fixed-length cutting, as well as 90° straight cutting and 45° oblique cutting, which greatly improves production efficiency and reduces product cost.
At present, our equipment occupies a large share in China, and we also have enough experience and ability to help customers solve problems.
Published specifications
| No | Detials | Requirments | Mark |
|---|---|---|---|
| DY-3 FRP Rubber Type Tractor | |||
| 1 | Effective Traction length | 2500-3500mm | |
| 2 | Motor | 2.2KW*2pcs | |
| 3 | Torque | 2000N.M | |
| 4 | Transfer method | Chain drive | |
| 5 | Traction Speed | 0.5 ~ 1.8m/mim | |
| 6 | Speed regulation mode | Frequency | |
| 7 | Traction method | Rubber Block Type | |
| 8 | Rubber Block Hardness | 70-75 | |
| 9 | Traction frame clamping method | Air | |
| 10 | Machine Frame Material | Rectangular steel | |
| 11 | Guide port | with guide post | |
| 12 | Size | 3800*940 | |
| 13 | Center height | 1M | |
| 14 | Opening form of the traction frame | Swing arm type |
| No | Details | Details | Mark |
|---|---|---|---|
| Automatic Cutting Machine | |||
| Cutting Machine Equipped with a small water pump to spray water to suppress dust when cutting. | |||
| 1 | Cutting Way | Saw | |
| 2 | Saw Type | High speed steel | |
| 3 | Air Pressure | 0.4～0.7Mpa | |
| 4 | Fixed-Length Cutting Way | Positioning cutting | |
| 5 | Motor | 2.2Kw | |
| 6 | Compression method | Air | |
| 7 | Cutting direction | From top to bottom | |
| 8 | Cutting Range | ≤φ45mm | |
| 9 | Cutting angle | 45° / 90° |
Questions plants usually ask
What problem does the GFRP Rebar Pultrusion Line Rubber Haul off Machine address?
Unstable haul-off speed or a rough cut ruins thread profile and tensile consistency on FRP rock bolts.
Can Prowell customize the GFRP Rebar Pultrusion Line Rubber Haul off Machine?
Yes. The source plant states equipment is 100% customizable — pot volume, impeller, motor and discharge are sized to the recipe.
How do I request a quotation?
WhatsApp or email Jarvis with material, bulk density, kg/batch or kg/hour, and any heating/cooling requirement. Use [email protected] or +86 185 5118 6172.
Are the published models the only sizes?
The tables on this page are the models printed on the original Prowell listing. Other sizes are discussed against your batch weight.
Related machines
FRP Rebar Cutting Machine for Fiberglass Rebar Rock Bolts
FRP Rebar Caterpillar Machine and Cutting Machine | Pultrusion Production Line Equipment
FRP Fiberglass Rebar Pultrusion Caterpillar Pulling Machine
