GFRP Rebar Glass Fiber Reinforcement Production Machine
Prowell Technology has developed a high-performance drawing machine and dust-free and environmentally friendly fully automatic cutting equipment for FRP Rebar as shown in the figure below.
Unstable haul-off speed or a rough cut ruins thread profile and tensile consistency on FRP rock bolts.
How this machine is used
Prowell Technology has developed a high-performance drawing machine and dust-free and environmentally friendly fully automatic cutting equipment for FRP Rebar as shown in the figure below.
GFRP Rebar Production machine Rubber Type Caterpillar Machine After years of research, we have redesigned and developed the GFRP Rebar Production machine Rubber Typr Caterpillar Machine based on the needs of the improved equipment.
This machine is perfectly suitable for pultruding FRP Rebar and glass fiber rebar.
FRP Type Caterpillar Machine is suitable for pulling and extruding multiple small-sized FRP Rebars or a single large-sized fiberglass anchor rod.Configure the appropriate reduction ratio according to the speed required for production, and then use the frequency converter to adjust the speed arbitrarily within the appropriate range.The pultrusion equipment is configured with a suitable reduction ratio according to the speed required for production, and then the speed is adjusted arbitrarily within a suitable range using a frequency converter.
Published specifications
| DY-2 Caterpillar Haul off Machine For FRP Rebar | ||
|---|---|---|
| 1 | Haul off frame total length | 4500mm |
| 2 | Motor Power | 2.2KW Cycloid reducer*2 |
| 3 | Torque | 2000N.M |
| 4 | Speed | 1 ~ 2.5m/mim |
| 5 | Traction frame clamping method | Pneumatic compression/opening |
| 6 | Traction Block material | Rubber Type |
Questions plants usually ask
What problem does the GFRP Rebar Glass Fiber Reinforcement Production Machine address?
Unstable haul-off speed or a rough cut ruins thread profile and tensile consistency on FRP rock bolts.
Can Prowell customize the GFRP Rebar Glass Fiber Reinforcement Production Machine?
Yes. The source plant states equipment is 100% customizable — pot volume, impeller, motor and discharge are sized to the recipe.
How do I request a quotation?
WhatsApp or email Jarvis with material, bulk density, kg/batch or kg/hour, and any heating/cooling requirement. Use [email protected] or +86 185 5118 6172.
Are the published models the only sizes?
The tables on this page are the models printed on the original Prowell listing. Other sizes are discussed against your batch weight.
Related machines
FRP Rebar Cutting Machine for Fiberglass Rebar Rock Bolts
FRP Rebar Caterpillar Machine and Cutting Machine | Pultrusion Production Line Equipment
FRP Fiberglass Rebar Pultrusion Caterpillar Pulling Machine
