A mid-tone slab with a neutral cast, featuring a light ground and bold, dark markings. The pattern shows high contrast between very light and near-black tones.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
ASR009 is a solid quartz slab made from 93% natural quartz aggregate. It is used by countertop fabricators and builders in residential and commercial interiors. The slab suits modern and minimalist design schemes.
Countertop fabricators and builders seeking reliable, neutral-toned slabs
Fabricators need consistent, reproducible slabs with strong contrast and neutral tones to meet design demands without colour variation
Consistent appearance across all slabs in a batch
Resistant to stains, scratches, and heat under normal use
Available in multiple thicknesses and surface finishes
Compared with natural marble this slab does not need sealing and does not etch under kitchen acids. Compared with sintered stone it is easier to fabricate but less tolerant of a hot pan placed directly on the surface.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | ASR009 |
|---|---|
| Collection | ASR Quartz |
| Material | 93% natural quartz aggregate bound with polymer resin and pigment |
| Quartz content | 93% |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Kitchen work is where most of our slab volume ends up, and it is the least forgiving application in the catalogue.
Vanity work is a small-part business: many pieces, tight sizes, high cut-out count.
Commercial interiors put surfaces in front of a lot of people and very little maintenance budget.
Yes, free samples are available for distributors, builders, and countertop factories.
The slab is available in polished, honed, and leathered finishes to suit different design preferences.
Yes, custom thicknesses are available upon request to meet specific project needs.
Yes. Email [email protected] with the code ASR009, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Thickness decides edge detail, handling weight and support requirements. Both are standard in our production.
The three textures we produce, and what each one does to colour, fingerprints and maintenance.
Three ways to specify white, and how to avoid the warm-cast problem on large areas.
Tell us the thickness, finish and quantity you need and we will come back with availability.
