Gelid Short Snorkel Jacket
A short snorkel jacket built as an OEM programme, not a stock item. You provide a sketch or reference sample, and Foriver develops the tech pack, cut sheet, and first sample before running the bulk on the same production line. The jacket's construction—baffle…
What This Style Is
A short snorkel jacket built as an OEM programme, not a stock item. You provide a sketch or reference sample, and Foriver develops the tech pack, cut sheet, and first sample before running the bulk on the same production line. The jacket's construction—baffle pattern, fill weight, hood style, zipper placement, and pocket layout—is defined by your tech pack, ensuring the final product matches your design intent. Foriver has been manufacturing puffer and down jackets in Dongguan since 2011, and the Gelid Short Snorkel Jacket is one of the core styles produced each season.
What You Get From Running It Here
- Baffle pattern, fill weight and hood construction specified in your tech pack, not a factory standard
- Low MOQ allows testing a first colourway in market without high volume commitment
- Sample produced quickly at low sample cost, enabling fit and colour approval before bulk
- Fill material and shell fabric selected together and swatched for your approval
- Zipper, drawcord, cord lock and label supplied to your nominated spec or sourced and swatched
Where This Style Usually Ends Up
An independent outdoor brand launching a winter-ready short puffer with a snorkel hood for the first time
A university club ordering branded jackets with embroidered logo and team name on the back
A startup replacing a supplier and needing an existing short puffer matched exactly in fit and construction
A brand testing two seasonal colourways at low volume before committing to a full production run
Who Orders This
Independent clothing brands, startups, companies, clubs and associations that need a short snorkel puffer jacket made to their own design, in quantities most large factories will not accept.
What It Fixes In Your Sourcing
- Factories that refuse small first orders and require high volume commitments before production
- No internal team to convert a sketch into a production-ready tech pack and cut sheet
- Samples that arrive weeks late and miss the seasonal buying window
- Bulk production that diverges from the approved sample due to lack of batch inspection
- Sourcing fill, shell fabric, and trims from multiple vendors with no single point of coordination
Construction You Specify
- Baffle pattern and fill weight specified per your tech pack, with quilting stitched to prevent shifting
- Snorkel hood with adjustable drawcord and internal elastic, constructed to your fit and size run
- Pocket layout, welt or patch, positioned to your grading and construction spec
- Woven main label, care label and hangtag applied to your artwork or supplied by you
- Print, embroidery, heat transfer or applique branding placed to your exact specification
Specification Sheet
Only what the factory states. Anything that would need a number nobody has published is marked TBC and confirmed on your enquiry rather than guessed.
| Product type | Gelid Short Snorkel Jacket |
|---|---|
| Garment family | Puffer & Down Jackets |
| Production | Made to customer tech pack, OEM and ODM |
| Factory | Dongguan, Guangdong, China |
| Fabric and trims | Selected with you and confirmed by swatch, or nominated by you |
| Branding | Print, embroidery, heat transfer, applique, woven and care labels |
| Minimum order quantity | Low MOQ — confirmed per construction (TBC) |
| Sample lead time | Fast sampling — confirmed per style (TBC) |
| Production lead time | TBC |
Fabric And Trims
- Shell, lining and fill selected together and confirmed by physical swatch before cutting
- Materials hand-picked for warmth and UV resistance across seasons and regions
- Fabric checked for leaks and tears before it enters the cutting room
How It Gets Made
- Send a hand sketch, a reference garment or a digital image to start the project
- We write the tech pack: construction, colours, materials, trim list and grading
- Cut sheet defines the length, width and height of every panel across the size run
- First sample produced quickly at low sample cost for your fit, colour and branding approval
- Approved sample is integrated into the bulk production line
- Bulk batch inspected at the factory before packing and handover
What Gets Checked
- Fabric inspected for leaks and tears before cutting
- Sewn sample measured against the approved cut sheet and tech pack
- Every bulk batch inspected at the factory for construction, stitching and finish
- Fill weight and baffle alignment checked against the approved sample
What You Can Change
- Shell, lining, coating and fill specified per style and swatched for approval
- Embroidery, screen print, heat transfer and applique branding applied to your spec
- Size run and grading set to your target market and fit requirements
How To Brief This Style
- Send the sketch with any reference garment you want the fit matched to
- Confirm shell, lining and fill from the swatch set before the sample is cut
- Approve the sample on fit, colour and branding placement in writing
- Lock the size run and per-size quantity before bulk is scheduled
- Tell us the packing method your warehouse or marketplace requires
Honest Comparison With The Alternatives
| Buying stock puffers from a wholesaler | Slower to first delivery and you carry the development work, but the garment is yours and nobody else sells it |
|---|---|
| A large-volume factory | Unit cost at high volume can be lower there, but they will not take a low first order or develop a tech pack for you |
| A local domestic maker | Freight and lead time are longer from China, and material and trim choice is far wider |
Certifications
Foriver publishes no third-party certification, audit or test standard, so none is claimed here. What the factory does state is that fabric is tested for leaks and tears before cutting and that every bulk batch is inspected in-house. If your market requires a specific certificate, ask before you sample.
Other Styles In Puffer & Down Jackets
Gelid Short Snorkel Jacket: Buyer Questions
What is the minimum order quantity for a custom Gelid Short Snorkel Jacket?
Foriver is set up for low MOQ and bundles small orders across its production partners. Send your style and size run and we will confirm the minimum for that specific construction.
What do you need from me to start?
A hand drawing, a reference product or a digital image is enough. Our team writes the tech pack and cut sheet from there.
How long does a sample take?
Sampling is one of the things the factory is set up to do fast, at low sample cost. Lead time depends on fabric availability, so confirm it with us for your style.
Can I supply my own fill and shell fabric?
Yes. Nominated fill, shell fabric and trims can be used, or we can source and swatch them for your approval.
Can you match a jacket I already sell?
Yes. Send the physical garment and we will pattern from it, then confirm the fit against your approved sample.
How is quality checked before shipment?
Fabric is inspected before cutting and every bulk batch is inspected at the factory against the approved sample and cut sheet.
Which markets do you already ship to?
Foriver has been supplying buyers in Australia, New Zealand, the United States, Europe, the Middle East and Africa since 2011.
Get Gelid Short Snorkel Jacket Quoted
Send your sketch, tech pack or a reference garment and the quantity you have in mind. Foriver comes back with the development plan and the sample stage.