Soap Dispenser
Soap Dispenser-IA01
Soap Dispenser-IA01 is a soap dispenser from Funmax, built in SUS304 stainless steel. It measures W98xD63xH153mm × 0.7mm/W104xD70xH179mm × 0.7mm/W122xD66xH202mm × 0.7mm/W122xD72xH202mm × 0.7mm. It is offered in polished and satin, so it can be matched to the rest of the fittings in the same room.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Size | W98xD63xH153mm*0.7mm/W104xD70xH179mm*0.7mm/W122xD66xH202mm*0.7mm/W122xD72xH202mm*0.7mm |
|---|---|
| Capacity | 500ml/800ml/1000ml/1200ml |
| Material | SUS304 |
| Finish | Satin/polish |
| Finish options | Polished, Satin |
| Material family | SUS304 stainless steel |
| Category | Soap Dispenser |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Available in 2 finishes (polished and satin), so one specification covers rooms with different finish schedules.
- Published overall size of W98xD63xH153mm × 0.7mm/W104xD70xH179mm × 0.7mm/W122xD66xH202mm × 0.7mm/W122xD72xH202mm × 0.7mm for setting-out before the wall is closed up.
- Made in the same factory as the rest of the Commercial Washroom Solutions range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Plastic pump bodies crack at the collar after a year of refills.
- Units that only take a proprietary cartridge lock a facility into one soap supplier.
- Dispensers that do not match the paper units make the washroom look assembled from leftovers.
Who it is for
Specified By
- Facility managers buying refillable systems
- Washroom contractors
- Distributors
Application scenarios
Where It Is Installed
- Office washrooms
- School and campus facilities
- Hotel back-of-house
- Retail amenities
Customisation
Options
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in polished and satin.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Soap Dispenser-IA01 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Soap Dispenser
FAQ
Soap Dispenser-IA01 — Questions
What is the Soap Dispenser-IA01 made from?
SUS304 stainless steel, as stated on our datasheet for this model.
What size is the Soap Dispenser-IA01?
W98xD63xH153mm × 0.7mm/W104xD70xH179mm × 0.7mm/W122xD66xH202mm × 0.7mm/W122xD72xH202mm × 0.7mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
Which finishes can I order?
This model is listed in polished and satin. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The soap dispenser range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Soap Dispenser-IA01
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.