Shower Niche
Niche-ZBJ
The Niche-ZBJ sits in our shower niche range, built in SUS304 stainless steel. It measures 215 × 785 × 125mm. It is offered in matt black, gun grey, white and brushed, so it can be matched to the rest of the fittings in the same room. Configuration: H side Main material 1.2mm thickness with paper dispenser Product Dimensions – 230*800*125mm Hole.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Configuration | H side Main material 1.2mm thickness with paper dispenser Product Dimensions – 230*800*125mm Hole |
|---|---|
| Size | 215*785*125mm |
| Material | SUS304 |
| Finish | Brushed Gun Metal Brushed Gun Black Brushed Brass Matte Black White |
| Finish options | Matt Black, Gun Grey, White, Brushed |
| Material family | SUS304 stainless steel |
| Category | Shower Niche |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Available in 4 finishes (matt black, gun grey, white and brushed), so one specification covers rooms with different finish schedules.
- Published overall size of 215 × 785 × 125mm for setting-out before the wall is closed up.
- Made in the same factory as the rest of the Hospitality Bathroom Products range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Site-built niches crack at the corners and leak into the wall build-up.
- Stock niche sizes rarely land on a tile module, leaving cut slivers at the edge.
- Plastic-lined niches stain and cannot be cleaned back to the original finish.
Who it is for
Specified By
- Tiling and waterproofing contractors
- Hotel bathroom fit-out contractors
- Residential developers and renovators
Application scenarios
Where It Is Installed
- Hotel shower walls
- Residential wet rooms
- Apartment bathroom fit-outs
- Spa showers
Technical features
From the Datasheet
- H side Main material 1.2mm thickness with paper dispenser Product Dimensions – 230*800*125mm Hole
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in matt black, gun grey, white and brushed.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Niche-ZBJ over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Made to project size — this range is built to the opening your drawing leaves rather than to stock sizes only.
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Shower Niche
Read next
Guides and Applications
Buying Guide
Choosing a Bathroom Hardware Finish That Will Still Match in Year Five
Chrome, matt black, gun grey, brushed gold and rose gold — how each behaves under cleaning, and why finish nam…
Industry
Hotels and Hospitality
A hotel bathroom is judged in ten seconds and cleaned twice a day. Funmax supplies the whole room — towel warm…
Industry
Residential Developments
On a residential development the bathroom is repeated hundreds of times, so a small inconsistency is multiplie…
FAQ
Niche-ZBJ — Questions
What is the Niche-ZBJ made from?
SUS304 stainless steel, as stated on our datasheet for this model.
What size is the Niche-ZBJ?
215 × 785 × 125mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
Which finishes can I order?
This model is listed in matt black, gun grey, white and brushed. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The shower niche range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Niche-ZBJ
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.