Hair Dryer
Hair Dryer-ZA01+ZA02
Hair Dryer-ZA01+ZA02 is part of the Funmax hair dryer programme, built in ABS. It measures 185 × 175 × 98mm. It is offered in black and white, so it can be matched to the rest of the fittings in the same room. Electrical rating: 1300w Speed:20m/s 220V-240V (50Hz-60Hz).
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Size | 185*175*98mm |
|---|---|
| Finish | Black/White |
| Voltage | 220V-240V (50Hz-60Hz) |
| Power | 1300w Speed:20m/s |
| Material | ABS Temperature:65±15°C Rotate Speed:20000rpm |
| Finish options | Black, White |
| Material family | ABS |
| Category | Hair Dryer |
Key benefits
Why Specify This Model
- Available in 2 finishes (black and white), so one specification covers rooms with different finish schedules.
- Published overall size of 185 × 175 × 98mm for setting-out before the wall is closed up.
- Stated power draw of 1300w Speed:20m/s, so the electrical provision can be confirmed at design stage.
- Made in the same factory as the rest of the Commercial Washroom Solutions range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Loose hair dryers in a drawer get damaged, tangled and eventually stolen.
- Units that do not match the bathroom finishes undercut a premium room.
- Cords that are too short force the guest to stand away from the mirror.
Who it is for
Specified By
- Hotel operators and fit-out contractors
- Gym and leisure club change rooms
- Serviced apartment developers
Application scenarios
Where It Is Installed
- Hotel guest bathrooms
- Gym and pool change rooms
- Serviced apartments
- Spa facilities
Customisation
Options
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Comparison
How It Compares
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in black and white.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Have the electrical provision confirmed by a qualified electrician against the stated rating.
- Clean with a neutral detergent and a soft cloth. Avoid abrasive cleaners and solvents, which dull the finish.
- Send the model code Hair Dryer-ZA01+ZA02 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Hair Dryer
FAQ
Hair Dryer-ZA01+ZA02 — Questions
What is the Hair Dryer-ZA01+ZA02 made from?
ABS, as stated on our datasheet for this model.
What size is the Hair Dryer-ZA01+ZA02?
185 × 175 × 98mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
Which finishes can I order?
This model is listed in black and white. If you need a finish that is not on this list, ask us before you specify it.
What is the electrical rating?
1300w Speed:20m/s 220V-240V (50Hz-60Hz). Installation must be carried out by a qualified electrician.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The hair dryer range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Hair Dryer-ZA01+ZA02
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.