Behind Mirror
Behind the mirror products – FE03
Behind the mirror products – FE03 is a behind mirror from Funmax, built in SUS304 stainless steel. It measures W420 × H270 × D110mm.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Size | W420*H270*D110mm |
|---|---|
| Material | SUS304 |
| Material family | SUS304 stainless steel |
| Category | Behind Mirror |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Published overall size of W420 × H270 × D110mm for setting-out before the wall is closed up.
- Made in the same factory as the rest of the Commercial Washroom Solutions range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Loose dispensers on a vanity top get pushed around and leave soap rings on the stone.
- Separate surface-mounted units mean three sets of fixings and three different lock keys.
- Servicing from the front means cleaners work across a wet counter.
Who it is for
Specified By
- Architects designing washrooms with a continuous mirror band
- Hotel and office lobby washroom fit-outs
- Contractors coordinating vanity joinery with washroom hardware
Application scenarios
Where It Is Installed
- Hotel lobby washrooms
- Corporate headquarters washrooms
- Restaurant and bar washrooms
- Premium retail amenities
Customisation
Options
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Behind the mirror products – FE03 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
Related products
Others in Behind Mirror
FAQ
Behind the mirror products – FE03 — Questions
What is the Behind the mirror products – FE03 made from?
SUS304 stainless steel, as stated on our datasheet for this model.
What size is the Behind the mirror products – FE03?
W420 × H270 × D110mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The behind mirror range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Behind the mirror products – FE03
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.