Multi Station Bolt Forming Machine

Three Stations Bolt Forging Machine

Multi station bolt forming machines carry the blank through three, four, five or six forging stations in one stroke sequence, so heads, shanks and shoulders are cold formed without secondary operations. The published parameter table for this machine covers models 43S, 63S, 63L, 83S, 83L, 83LL.

Built by Ningbo Anchors Precision Machinery Co., Ltd. in Ningbo, China
Full manufacturer parameter table on this page
Running video recorded on the machine
Rapid response technical team for operation and troubleshooting

Request a Quote Talk to an Engineer Email Us

Have a drawing? Send it straight to WhatsApp or email — there is no form to fill in.

Main Features of Three Stations Bolt Forging Machine

1.Cast iron is made of alloy cast iron with excellent tensile strength, and has been inspected by professional third party. It has excellent shock absorption performance. In the case of high-speed stamping and high-speed feeding, the body Is stableand the vibration Is small which ensures the long-term accuracy of the machine.

2.Dynamic balance system is adopted to ensure stable and accurate high-speed operation.

3.The servo motor PLC electric control system is adopted to realize the detection of oil pressure, air pressure, voltage, current and other machine operation conditions.

4.Self developed humanized operation interface, emphasizing the safety and convenience of operators.

4.The cutting system developed by our own patent can realize the quick installation of the cutter, optimize the cutting curve and ensure the smooth and stable cutting.

5.The modular clamp system developed by our own patent has the advantages of high speed and precision,convenient operation and easy maintenance. It can save the time for the operator to adjust the machine and reduce the learning time of the fresh operator.

6.The machine adopts enlarged crankshaft and connecting rod to enhance the impact resistance and reduce the elastic deformation. The machine has high hardness and excellent wear resistance with large area contact. It is not easy to occur shaft holding phenomenon. It can adapt to high-grade alloy copper sleeve and bearing bush with high load and high sliding speed(8m/s). The wear resistance and front dead center of the machine are guaranteed for a long time.

7.The machine gear adopts whole heat treatment and high precision gear teeth grinding technology to ensure long-term wear resistance and low noise.

Main Technical Parameters of Three Stations Bolt Forging Machine

THREE STATIONS HIGH SPEED BOLT MAKING MACHINE
MODEL	UNIT	43S	63S	63L	83S	83L	83LL
FORGING STATION	NO.	3	3	3	3	3	3
FORGING FORCE	TONS	16	35	35	60	60	65
MAX.CUT-OFF DIA.	MM	4	8	8	10	10	10
MAX.CUT-OFF LENGTH	MM	66	70	120	85	135	175
OUTPUT RATE	PCS/MIN	350	270	150	220	160	120
P. K. O. STROKE	MM	12	12	20	12	15	30
K.O STROKE	MM	52	52	115	65	125	165
MAIN MOTOR POWER	KW	11	11	11	15	22	22
OVERALL DIMS. OF CUT OFF DIE	MM	Φ20	Φ30	Φ30	Φ30	Φ30	Φ30
OVERALL DIMS. OF PUNCH DIE	MM	Φ35*75L	Φ40*90L	Φ40*110L	Φ45*100L	Φ45*115L	Φ45*115L
OVERALL DIMS. OF MAIN DIE	MM	Φ40*85L	Φ50*85L	Φ50*123L	Φ60*95L	Φ60*135L	Φ60*185L
DIE PITCH	MM	50	60	60	70	80	80
APPROX. WEIGHT	T	4	7	9	10	13	15.5
APPLICABLE BOLT SIZE	MM	1-4	3-6	3-6	5-8	5-8	5-8
SHANK LENGTH BELOW HEAD	MM	6-50	10-50	30-100	12-60	30-110	30-110

MODEL	UNIT	103S	103L	133S	133L	133LL	163S	203L
FORGING STATION	NO.	3	3	3	3	3	3	3
FORGING FORCE	TONS	80	90	105	120	130	190	350
MAX.CUT-OFF DIA.	MM	12	12	15	15	15	18	23
MAX.CUT-OFF LENGTH	MM	105	190	140	250	350	195	250
OUTPUT RATE	PCS/MIN	180	130	150	100	70	100	75
P. K. O. STROKE	MM	15	30	20	30	60	30	45
K.O STROKE	MM	80	165	110	220	330	170	220
MAIN MOTOR POWER	KW	22	22	30	37	37	45	75
OVERALL DIMS. OF CUT OFF DIE	MM	Φ45	Φ45	Φ55	Φ55	Φ55	Φ60	Φ75
OVERALL DIMS. OF PUNCH DIE	MM	Φ53*115L	Φ53*115L	Φ60*115L	Φ60*170L	Φ60*250L	Φ75*185L	Φ90*190L
OVERALL DIMS. OF MAIN DIE	MM	Φ75*108L	Φ75*185L	Φ85*135L	Φ85*265L	Φ90*340L	Φ100*190L	Φ125*240L
DIE PITCH	MM	90	90	110	110	110	126	138
APPROX. WEIGHT	T	13.8	19	18	25	36	38	58
APPLICABLE BOLT SIZE	MM	6-10	6-10	8-12.7	8-12.7	8-12.7	10-16	12-20
SHANK LENGTH BELOW HEAD	MM	15-75	30-150	20-105	50-205	100-300	20-155	25-200

1.We reserves the right to modify the above parameters, and may not be notified if there is any modification;

2.The most suitable production speed of the product depends on the shape, size and material of the product;

3.The maximum material shear diameter and the suitable product diameter listed in the table are calculated as medium carbon alloy steel, equivalent to 10.9 high strength screws.

Details Show of Three Stations Bolt Forging Machine

Three Stations Bolt Forging Machine Running Videos


stainless 430 deep hole rivet cold forging machine	three stations screw bolt rivet making machine

See It Running

Machine Running Videos

Recorded on the machine by the manufacturer. The video only loads when you press play, so the page stays fast.

Running video 1 · Three Stations Bolt Forging Machine

Running video 2 · Three Stations Bolt Forging Machine

Other Models in Multi Station Bolt Forming Machine

Same family, different size range and station count.

3-4 Stations Bolt Cold Forging Machine

Multi Station Bolt Forming Machine

Four Die Four Blow Bolt Former

Multi Station Bolt Forming Machine

Three Die Three Blow Bolt Maker

Multi Station Bolt Forming Machine

13B-4S Four Die Four Blow Bolt Former

Multi Station Bolt Forming Machine

13B-5S Five Station Bolt Making Machine

Multi Station Bolt Forming Machine

36B-5SL Five Station Bolt Making Machine

Multi Station Bolt Forming Machine

36B-6SL Six Station Bolt Forging Machine

Multi Station Bolt Forming Machine

19B-5S Five Station Bolt Making Machine

Multi Station Bolt Forming Machine

All Multi Station Bolt Forming Machine All Fastener Making Machinery How It Is Built

Questions and Answers

Three Stations Bolt Forging Machine FAQ

What is the Three Stations Bolt Forging Machine used for?

It belongs to the multi station bolt forming machine family. Multi station bolt forming machines carry the blank through three, four, five or six forging stations in one stroke sequence, so heads, shanks and shoulders are cold formed without secondary operations. The structural description and the manufacturer parameter table on this page describe what this particular model covers.

Can I get the technical specification for my size range?

The parameter table on this page is the manufacturer table for the model range. Tell us the exact fastener diameter and length you run and we will confirm which line of the table applies.

Is there a video of this machine working?

Yes. A running video recorded on this machine is on this page. Press play in the video section, or ask on WhatsApp for a video of the machine running your specific part.

Is this machine built by Anchors Machinery?

All equipment is built at the company works in Ningbo, Zhejiang, China, in an 18,000 square metre workshop with its own machining facilities.

Can it be supplied together with the upstream and downstream machines?

Yes. Anchors Machinery is a machine manufacturer as well as a solution provider and project contractor, so complete fastener and stamping production lines can be supplied rather than single machines only.

What support do I get after delivery?

A rapid response technical team instructs machine operation and helps solve problems that come up during production, so that machine efficiency and your output are protected after installation.

How do I request a price for this machine?

Send the part drawing or a photo plus the required size range and output per minute to [email protected] or by WhatsApp on +86 185 5689 5898. Quotations are prepared against the model and tooling configuration that suits your part.

Send the Part, Get the Machine Specification

A drawing or a clear photo plus your required output is enough for us to confirm the model and tooling.

Chat on WhatsApp Email Us Talk to an Engineer

Send drawings, samples or part specifications by WhatsApp or email — no forms, no sign-up.